Standard Epoxies

Adhesive Epoxies

PRO-SET® Assembly adhesives are pre-thickened, two-part epoxy adhesives used for secondary bonding of laminated composites as well as steel, aluminium, cast iron, concrete, stone, and most woods.

The PRO-SET Adhesive epoxies range includes products suitable for general purpose and composite bonding as well as heavily loaded applications.

General purpose bonding

PRO-SET ADV-170 Adhesive is an extremely versatile epoxy for general purpose bonding, that is particularly popular for bonding teak decking. The resin and hardener components are thixotropic pastes and the adhesive is available in a range of pack sizes.

Composite bonding

Adhesives based on PRO-SET 175 Resin are used with Fast (273), Medium (275) or Slow (277) hardener. They are suitable for most composite bonding applications.

Heavily loaded applications

PRO-SET ADV-176/276 Toughened Adhesive delivers exceptional toughness and superior peel strength for heavily loaded applications and difficult-to-bond substrates. These include:

  • pre-impregnated fibres
  • sheet moulding compound
  • metals
  • most plastics

The PRO-SET ADV-175 and ADV-176 series of Assembly Adhesives are packaged in 400 ml 2-component cartridges and in bulk container sizes and are available in No Colour (NC) and Black (BK).

The broad range of PRO-SET adhesive epoxies

PRO SET Adhesive epoxies
General Purpose Adhesive Resin ADV-170
General Purpose Adhesive Hardener ADV-270
Fast Adhesive No Colour ADV-175/273-NC
Fast Adhesive Black ADV-175/273-BK
Medium Adhesive No Colour ADV-175/275-NC
Medium Adhesive Black ADV-175/275-BK
Slow Adhesive No Colour ADV-175/277-NC
Slow Adhesive Black ADV-175/277-BK
Toughened Adhesive No Colour ADV-176/276-NC
Toughened Adhesive Black ADV-176/276-BK

Adhesive Combined Resin/Hardener Selection

This guide compares the typical physical properties. Test specimens are cured at room temperature for two weeks unless otherwise noted. Neat epoxy samples are used for testing. These are typical values, not to be construed as specifications. Adhesives are available in two standard colours: No Colour (NC) and Black (BK).

Property Standard Unit ADV-170
ADV-270
General
Purpose
Adhesive
ADV-175
Resin ADV-
273 Fast
Hardener
ADV-175
Resin ADV-
275 Medium
Hardener
ADV-175
Resin ADV-
277 Slow
Hardener
ADV-176/
ADV-276
Toughened
Adhesive
Mix Ratio by Volume R:H 1.1 2.1 2.1 2.1 2.1
WorkingTime,
12.5mm bead @ 22℃
minutes 120 min 20 min 75 min 150 min 90 min
Hardness ASTM-D2240 Shore D 81 82 85 84 79
Compression Yield ASTM-D695 MPa 57 74 87 81 59
Tensile Strength ASTM-D638 MPa 33 43 54 49 35
Tensile Modulus ASTM-D638 GPa 2.6 2.6 3.6 2.9 2.0
Tensile Elongation ASTM-D638 % 3.3 -4 -4 -4 -4
Flexural Strength ASTM-D790 MPa 61 78 98 84 90
Flexural Modulus ASTM-D790 GPa 2.1 2.5 3.9 2.8 1.9
Lap Shear on A-366 Steel ASTM-D1002 MPa 25 16 16 14 20
Lap Shear on 2024T Aluminum ASTM-D1002 MPa 18 13 14 14 20
Tensile Adhesion to A-366 Steel ASTM-D4541 MPa 42 18 52 18 30
Tensile Adhesion to 2024T Aluminum ASTM-D4541 MPa 37 10 47 12 24

DOWNLOADABLE TECHNICAL DATASHEETS

PRO-SET ADV-170/ADV-270 General Purpose Adhesive Epoxy
PRO-SET ADV-175 with ADV-273 Fast Cure Adhesive Epoxy
PRO-SET ADV-175 with ADV-275 Medium Cure Adhesive Epoxy
PRO-SET ADV-175 with ADV-276 Medium Cure Toughened Adhesive Epoxy
PRO-SET ADV-175 with ADV-277 Slow Cure Adhesive Epoxy
PRO-SET ADV-176 with ADV-276 Medium Cure Super-Toughened Adhesive Epoxy
PRO-SET ADV-177 with ADV-272 Fast Cure Super-Toughened Adhesive Epoxy
PRO-SET ADV Range of Adhesive Epoxies